| Place of Origin | Japan | Part NO | DV47J040LFGL | Product name | AC Servo Motor Driver DV47J040LFGL |
| Condition | Original new/Used | Warranty | 6 Months | Type | SMT machine parts |
| Outside Diameter D | 2.047 in |
| Set Screw Size | 1/4-20 |
| Weight | 0.50 lb |
| Series | Industrial |
| Material | Bearing Steel |
| Dimension B2 | 0.531 in |
| Lubrication Type | Non-Relubricatable |
| Angle between Set Screws | 90 º |
| Center of Bearing from End S | 17.5 mm |
| Inner Ring Width B | 34.92 mm |
HMS5 and HMSA10 seals | SKF
HMS5 and HMSA10 seals are designed for oil or grease lubricated applications with operating temperatures ranging from –40 to +100 °C (–40 to +210 °F), short-
58X72X8 HMSA10 V - SKF | Oil Seals | BDI USA
SKF,58X72X8,HMSA10,V..,58MM,Shaft,Dia;,72MM,Housing,Bore;,Nominal,Width;,Viton,Lip;,Solid,Seal;,Actual,Spring,Loaded;,Sealing,Lips;,Stainless,Steel
HMS5 and HMSA10 - SKF Edge seals
HMS5 and HMSA10 seals are designed for oil or grease lubricated applications with operating temperatures ranging from –40 to +100 °C (–40 to +210 °F), short-
CR 100X125X12 HMSA10 V | Online Catalog | Bearings
Radial shaft seals. Metric with rubber OD. Viton material. SKF CR 100X125X12 HMSA10 V, CR-100X125X12-HMSA10-V, CR100X125X12HMSA10V,
130X160X12 HMSA10 V - SKF | Oil Seals | BDI USA
SKF,130X160X12,HMSA10,V.In,stock.,130MM,Shaft,Dia;,160MM,Housing,Bore;,12MM,Nominal,Width;,Viton,Lip;,Solid,Seal;,Actual,Spring,Loaded;,Sealing,Lips
35X47X7 HMSA10 V | SKF
35X47X7 HMSA10 V. Radial shaft seals for general industrial applications. Image may differ from product. See the technical specification for details
SKF SMALL BORE SEALS (#60X72X8 HMSA10 V): Amazon
SKF SMALL BORE SEALS (#60X72X8 HMSA10 V): Amazon.com: Industrial & Scientific
150X180X12 HMSA10 V | SKF
150X180X12 HMSA10 V. Radial shaft seals for general industrial applications. Radial shaft seals sit between rotating and stationary components, or two
CR Seals (SKF) 70X90X12 HMSA10 V - Motion
Buy CR Seals (SKF) 70X90X12 HMSA10 V Double Lip Oil Seal - Solid, 70 mm Shaft, 90 mm OD, 12 mm Width, HMSA10 Design, Fluoro Rubber (FKM) Lip