Place of Origin | Japan | Warranty | 1 Year | Application | Industrial Application |
Product name | Mitsubishi servo motor | Item | Servo | Type | Type |
Limiting Speed - Grease | 510 rpm |
Axial Load Factor Y1 | 2.95 |
Fillet Radius/Chamfer | 6 mm |
Retainer Material | Machined Brass |
Hole Diameter (do) | 15 mm |
Constant e | 0.23 |
Axial Load Factor Y0 | 2.89 |
Nr. of Holes | 8 |
Limiting Speed - Oil | 640 rpm |
da (min) | 588 mm |
130X160X12 HMSA10 V - SKF | Oil Seals | BDI USA
SKF,130X160X12,HMSA10,V.In,stock.,130MM,Shaft,Dia;,160MM,Housing,Bore;,12MM,Nominal,Width;,Viton,Lip;,Solid,Seal;,Actual,Spring,Loaded;,Sealing,Lips
58X72X8 HMSA10 V - SKF | Oil Seals | BDI USA
SKF,58X72X8,HMSA10,V..,58MM,Shaft,Dia;,72MM,Housing,Bore;,Nominal,Width;,Viton,Lip;,Solid,Seal;,Actual,Spring,Loaded;,Sealing,Lips;,Stainless,Steel
35X47X7 HMSA10 V | SKF
35X47X7 HMSA10 V. Radial shaft seals for general industrial applications. Image may differ from product. See the technical specification for details
HMS5 and HMSA10 seals | SKF
HMS5 and HMSA10 seals are designed for oil or grease lubricated applications with operating temperatures ranging from –40 to +100 °C (–40 to +210 °F), short-
CR Seals (SKF) 70X90X12 HMSA10 V - Motion
Buy CR Seals (SKF) 70X90X12 HMSA10 V Double Lip Oil Seal - Solid, 70 mm Shaft, 90 mm OD, 12 mm Width, HMSA10 Design, Fluoro Rubber (FKM) Lip
SKF SMALL BORE SEALS (#60X72X8 HMSA10 V): Amazon
SKF SMALL BORE SEALS (#60X72X8 HMSA10 V): Amazon.com: Industrial & Scientific
HMS5 and HMSA10 - SKF Edge seals
HMS5 and HMSA10 seals are designed for oil or grease lubricated applications with operating temperatures ranging from –40 to +100 °C (–40 to +210 °F), short-
CR 100X125X12 HMSA10 V | Online Catalog | Bearings
Radial shaft seals. Metric with rubber OD. Viton material. SKF CR 100X125X12 HMSA10 V, CR-100X125X12-HMSA10-V, CR100X125X12HMSA10V,
150X180X12 HMSA10 V | SKF
150X180X12 HMSA10 V. Radial shaft seals for general industrial applications. Radial shaft seals sit between rotating and stationary components, or two