| Place of Origin | Fujian, China | High performance | Response frequency 1.2Khz | High resolution encoder | 20bit Incremental type |
| Input/Output Pulse | 4Mpps 220v 230v single/three phase ac servo motor and drive | Analog Command Resolution | 16 bit(Optional) | Intelligent | Real-time Automatic Gain Adjustment |
| Automatic/Manual Trap filter | Automatic/Manual vibration Attenuation Control Function | Safe | Consideration for environment and Compliant with RoHS | environmental performance | Safe Torque Off(STO) function(Optional) |
| Motor Enclosure | Level with IP65/67 | Meet the Waterproof | 220v 230v single/three phase ac servo system |
| Bearing Number | 22222 |
| Y2 - Geometry Factor | 3.80 |
| Dimension N | 4.120 in |
| Dimension BC | 10.75 in |
| e - Geometry Factor | 0.26 |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Housing Style | Four-Bolt Square Fla |
| Shaft Size | 3-11/16 in |
| Full Timken Part Number | QVFL22V311SB |
| Dimension C | 5.5 in |
CR 100X125X12 HMSA10 V | Online Catalog | Bearings
Radial shaft seals. Metric with rubber OD. Viton material. SKF CR 100X125X12 HMSA10 V, CR-100X125X12-HMSA10-V, CR100X125X12HMSA10V,
130X160X12 HMSA10 V - SKF | Oil Seals | BDI USA
SKF,130X160X12,HMSA10,V.In,stock.,130MM,Shaft,Dia;,160MM,Housing,Bore;,12MM,Nominal,Width;,Viton,Lip;,Solid,Seal;,Actual,Spring,Loaded;,Sealing,Lips
58X72X8 HMSA10 V - SKF | Oil Seals | BDI USA
SKF,58X72X8,HMSA10,V..,58MM,Shaft,Dia;,72MM,Housing,Bore;,Nominal,Width;,Viton,Lip;,Solid,Seal;,Actual,Spring,Loaded;,Sealing,Lips;,Stainless,Steel
SKF SMALL BORE SEALS (#60X72X8 HMSA10 V): Amazon
SKF SMALL BORE SEALS (#60X72X8 HMSA10 V): Amazon.com: Industrial & Scientific
HMS5 and HMSA10 - SKF Edge seals
HMS5 and HMSA10 seals are designed for oil or grease lubricated applications with operating temperatures ranging from –40 to +100 °C (–40 to +210 °F), short-
35X47X7 HMSA10 V | SKF
35X47X7 HMSA10 V. Radial shaft seals for general industrial applications. Image may differ from product. See the technical specification for details
HMS5 and HMSA10 seals | SKF
HMS5 and HMSA10 seals are designed for oil or grease lubricated applications with operating temperatures ranging from –40 to +100 °C (–40 to +210 °F), short-
150X180X12 HMSA10 V | SKF
150X180X12 HMSA10 V. Radial shaft seals for general industrial applications. Radial shaft seals sit between rotating and stationary components, or two
CR Seals (SKF) 70X90X12 HMSA10 V - Motion
Buy CR Seals (SKF) 70X90X12 HMSA10 V Double Lip Oil Seal - Solid, 70 mm Shaft, 90 mm OD, 12 mm Width, HMSA10 Design, Fluoro Rubber (FKM) Lip